Home/MINI POWER SUPPLIES
MINI POWER SUPPLIES 2017-12-11T09:35:59+00:00

At Advanced Components Industries Inc., we are proud to introduce Mini Power Supplies from Spitznagel GmbH. These small power supplies offer high efficiency, low ripple and noise, and standby power consumption at 230 Vac < 210 mW. Learn more about these power supplies below. If you are interested in our Mini Power Supplies, contact us today!

 

Mini Power Supplies SPN 002

  • AC/DC-module for PCB-mounting
  • Universal input 85 – 265 VAC(47 – 440 Hz) 115 – 375 VDC
  • Efficiency up to 80 %
  • No load power consumption <160 mW – compliant IEC62301 and EuP 2005/32/EC
  • Short Circuit-, overload-, temperature-protection
  • Working-/Storage Temperature: -25°C bis +85°C
  • Working-/Storage- Humidity: 95% non condensing
  • View PDF
  • See SPN 002 Spec Sheet

    Part Number SPN00203 SPN00205 SPN00209 SPN00212 SPN00215 SPN00224
    Output DC Voltage 3.3V 5V 9V 12V 15V 24V
    Current Range 0-650 mA 0-400 mA 0-250 mA 0-200 mA 0-150 mA 0-100 mA
    Peak Current 750 mA 600 mA 450 mA 300 mA 250 mA 150 mA
    Rated Power 2.1 W 2.0 W 2.3 W 2.4 W 2.3 W 2,4 W
    Ripple & Noise 90 mV 90 mV 80 mV 80 mV 100 mV 95 mV
    Voltage Tolerance plus or minus 2%
    Load Regulation plus or minus 1%
    Setup, Rise Time 10 ms 10 ms 10 ms 15 ms 20 ms 20 ms
    Hold Up Time 10 ms 15 ms 20 ms 25 ms 25 ms 30 ms
    Input Voltage Range 85 – 265 VAC / 115 – 375 V DC
    Frequency 47 – 440 Hz
    Efficiency (Typ) 58% 67% 76% 76% 76% 77%
    AC Current (Typ)
    No Load Power
    Inrush Current (Typ) COLD START
    Protection Over Current
    Over Temperature Thermal shutdown 142°C
    Environment Temperature Working and storage: -25°C To +85°C
    Humidity Working and storage 95% rel humidity without condensation
    Safety & Emc Safety Standards EN60950, EN60335, EN61558-2-16
    Withstand Voltage Input / Output 4 kV/AC
    Insulation Res. Input / Output 100 mOhm / 500 VDC
    EMC / EMI EN55014-1, EN55014-2,EN55022 CLASS B (CISPR22)
    Harmonic Current EN61000-3-2,3
    EMS Immunity EN61000-4-2,3,4,5,6,8,11
    Note  1.Parameters not specially mentioned are measured at 230 VAC input, rated load and 25°C of ambient temperature.
     2.The SPN can NOT deliver permanent overcurrent, it would cause damages to the SPN.
     3.Ripple and noise are measured with 1uF electrolytic and 0,1 uF ceramic capacitor.

Mini Power Supplies SPN 005

  • AC/DC-module for PCB-mounting
  • Universal input 85 – 265 VAC(47 – 440 Hz) 115 – 375 VDC
  • Efficiency up to 80 %
  • No load power consumption <160 mW – compliant IEC62301 and EuP 2005/32/EC
  • Short Circuit-, overload-, temperature-protection
  • Working-/Storage Temperature: -25°C bis +85°C
  • Working-/Storage- Humidity: 95% non condensing
  • View PDF
  • See SPN 005 Spec Sheet

    Part Number SPN 00503 SPN 00505 SPN 00509 SPN 00512 SPN 00515 SPN 00524
    Output DC Voltage 3.3V 5V 9V 12V 15V 24V
    Current Range 0-1250 mA 0-1000 mA 0-550 mA 0-450 mA 0-340 mA 0-210 mA
    Peak Current 1800 mA 1600 mA 800 mA 600 mA 500 mA 250 mA
    Rated Power 4,1 W 5,0 W 5,0 W 5,0 W 5,0 W 5,0 W
    Ripple & Noise 90 mV 100 mV 90 mV 70 mV 120 mV 70 mV
    Voltage Tolerance plus or minus 2%
    Load Regulation plus or minus 1%
    Setup, Rise Time 3,7 ms 6 ms 11 ms 19 ms 19 ms 30 ms
    Hold Up Time 6,7 ms 9 ms 17 ms 29 ms 32 ms 47 ms
    Input Voltage Range 85 – 265 VAC / 115 – 375 V DC
    Frequency 47 – 440 Hz
    Efficiency (Typ) 69% 73% 77% 79% 77% 78%
    AC Current (Typ)
    No Load Power
    Inrush Current (Typ) COLD START
    Protection Over Current <2,4 A <1,8 A <1,0 A <0,7 A <0,6 A <0,3 A
    Over Temperature Thermal shutdown 142°C
    Environment Temperature Working and storage: -25°C To +85°C
    Humidity Working and storage 95% rel humidity without condensation
    Safety & Emc Safety Standards EN60950, EN60335, EN61558-2-16
    Withstand Voltage Input / Output 4 kV/AC
    Insulation Res. Input / Output 100 mOhm / 500 VDC
    EMC / EMI EN55014-1, EN55014-2,EN55022 CLASS B (CISPR22)
    Harmonic Current EN61000-3-2,3
    EMS Immunity EN61000-4-2,3,4,5,6,8,11
    Note  1.Parameters not specially mentioned are mesured at 230 VAC input, rated load and 25°C of ambient temperature.
     2.The SPN can not deliver permanent over current, it would cause damages to the SPN.
     3.Ripple and noice are mesured with 1uF electrolytic and 0,1 uF ceramic capacitor
Contact Us